If your roof has sustained extreme physical damage or leaks in multiple locations, it may be time for A. Parker Contracting.

Re-roofing can be expensive and noisy, but it offers a permanent solution to leaks and complies with building codes and aesthetics requirements.

roofing

Moderate roof damage often requires a partial replacement. This can result in aesthetic differences between the repaired and replaced sections, but it’s still less costly than a full replacement.

Shingles are the part of a roof that gives it its visual character. They are square in shape and come in a variety of colors, textures, and materials. The most common are asphalt shingles, although wood and clay are also available. They are important because they protect the roof and the house from water, cold, and heat. They help keep animal and insect pests out and lower energy bills by keeping the house warmer.

Shingle roofs must be maintained to keep them in good condition. Missing or damaged shingles should be repaired promptly. If left unchecked, moisture can penetrate the roof deck and rot the board underneath it. The resulting roof leak may damage other parts of the house or create a dangerous mold problem.

In some cases, it may be better to replace the shingle rather than repair it. This is particularly true if it is an older shingle that is starting to show signs of age. A tar sealant may help hold a loose shingle in place for another season or two, but it is not a long-term solution. A new shingle will provide much more protection and last longer.

As a homeowner, you should inspect the roof regularly to look for missing or damaged shingles. This is especially important during periods of high winds, which are often seen in . It is also a good idea to check with your homeowners insurance agent about a potential replacement roof if the damage is severe enough.

It is best to have an expert do a complete inspection of the roof. This will allow them to decide whether it is time for a replacement or just a few repairs.

Flashing is a thin piece of impervious material installed at the joints and seams where roofing materials meet walls, chimneys, vent pipes, skylights or other protrusions on your roof. It’s a key component in sealing the areas of your roof that are most prone to leakage and other moisture related problems. Flashing is typically made of metal, but it can be built from other materials as well.

Most homes have two types of flashing. There’s base flashing, which is often referred to as apron flashing because it’s the bottom piece that acts as a water barrier between your home and rainwater. There’s also counter flashing, which is often installed over the base to seal the area where the two pieces of flashing meet. Both types of flashing have built-in expansion joints so that they can flex as your home expands and contracts throughout the seasons.

There’s also pipe flashing, which is installed around the bottom of pipes or vents that extend through your roof. This type of flashing has a central opening that can be metal for vents, or rubber for pipes, which is then slips over the pipe’s outside diameter and then down and along the wall to seal the area. It’s important to have both base flashing and pipe flashing installed to ensure that your roof is completely sealed around the areas where water could penetrate if there’s an issue with your roof.

Some signs that your roof flashing needs repair or replacement include discoloration on the interior walls near the roof flashing, leaking spots around windows and doors, and missing sections of flashing. If you notice any of these warning signs, it’s best to call a professional building contractor who can safely and quickly inspect your roof and fix any issues with your flashing.

When you think of your roof, your mind likely goes to shingles and the flashing around dormers and vents. But what you may not realize is that the underlayment plays an important role in your roof’s overall integrity and safety. Underlayment, which is sandwiched between the shingles and sheathing or decking of your roof, adds another layer of protection against moisture.

A professional roofer will install an underlayment over the bare sheathing of your roof before installing the shingles. This prevents moisture from penetrating the underlying layers of your home, which can cause damage and mold growth. It also serves as an extra layer of protection should a severe storm blow off some or all of your shingles.

There are two basic types of underlayment: felt and synthetic. Felt underlayment was the standard for many years until it was replaced by synthetic materials that are easier to install and have better water-resistance properties. The type of underlayment used on your roof will depend on the weather conditions in your area and the type of shingle you plan to use.

You will need to hire a reputable roofing contractor to help you choose the right underlayment for your project. Choosing the wrong type can increase your chances of leaks and other roofing problems. You will want to choose a waterproof underlayment that is easy for your roofers to install.

The underlayment should be securely fastened to the roof deck using either staples or nails. If the underlayment is nailed to the roof deck, the nails should be spaced no more than 12 inches apart. For a smoother installation, the underlayment should be overlapped at least 6 inches. You will need to check the underlayment regularly to ensure that it is still secure and that there are no holes or rips.

Oftentimes, when a roofer repairs a section of the roof, they will also replace the decking. Typically, the roof decking is made of OSB or plywood panels that form the sheathing for the roof. Today, most building departments require a half-inch thick sheet of sheathing for the roofs they permit. Older homes may have sheathing that is much thinner, and it can be very damaged by the weather, lack of maintenance, or pest infestation.

The sheathing is nailed to the joists or beams of the roof, which are connected to the house framing with joist hangers and lateral load connectors. Failure to install these fasteners properly can result in the deck pulling away from the house, and this can put the structure of the home at risk.

If you have a wood-based deck, it is vulnerable to termite and other pest infestations that can weaken the material and lead to rot. This can also happen if the deck is not regularly inspected and maintained, which can allow damage to go unnoticed.

Roof Decking can also be damaged by the leaking of water or moisture into the sheathing. This can be a problem when the sheathing is made of wood or wood composite. The moisture will cause rot and mold that can impact the structure of the roof and can also deteriorate the sheathing from the inside out.

If the sheathing is damaged, the shingles that are applied to it will not adhere well. This will not only result in the shingle being pulled loose and needing repair, but it could also cause leaks into the house. An experienced roofing contractor will be able to identify problems with the decking and can advise the homeowner on how to address them.

A functional roof requires a variety of pieces that work together to protect the interior and exterior of your home. One of the most important, yet often overlooked, components are roof vent boots. These inconspicuous accessories provide a critical shield for pipe vents and other protrusions on your roof, preventing leaks and moisture penetration. Unfortunately, if they are not installed or maintained properly, roof vent boots can become susceptible to damage that can compromise the performance and lifespan of your entire roofing system.

If you look up at the top of your house and see a tube sticking out from your roof, it is most likely a pipe vent. These are essential to prevent foul odors and gases from your sewer line from seeping into your home, but they are also vulnerable to the elements. A vent boot is a fitting that covers the vent and seals the area where it sticks out from your roof. If the vent boot becomes damaged or leaking, it will be necessary to have it replaced in order to protect your roofing materials.

While it may be tempting to try DIY pipe boot replacement, this is a job best left for a professional roofer. This is because a professional will be able to ensure that the new boot is properly installed, minimizing the likelihood of leaks. Furthermore, professionals will be able to use roofing caulk that is formulated to withstand the expansion and contraction of your roof’s materials. Choosing to ignore a faulty roof vent boot can lead to severe water damage, which can be costly and dangerous for homeowners. Regular inspection and maintenance will help to extend the life of your roof.